FJ6/JTS2D-35(18L) Series Power Distribution Terminal Block (Direct Conductor Connection, Flip-cover)

Product Features

Power distribution terminal block with one input and multiple outputs for multi-circuit power and circuit distribution.
Direct conductor connection (screw clamping).
Flip-type protective cover design allows convenient opening and closing during wiring.
High current-carrying capability for main power infeed/outfeed and heavy-current applications.
Suitable for use as a compact busbar solution, heavy-current terminal block, neutral (N) terminal block, protective earth (PE) terminal block, and equipotential bonding terminal block.
Reliable screw clamping ensures stable electrical contact.
Transparent protective cover for enhanced operational safety.
Compact design for DIN rail or panel mounting in control cabinets

Detailed introduction

Application

The FJ6/JTS2D series power distribution terminal blocks are suitable for power and circuit distribution in electrical control equipment, switchgear assemblies,distribution boxes, and multi-circuit enclosures.

They can serve as a compact alternative to small busbars for centralized connection and management of power, neutral, protective earth, and equipotential conductors.

Key Specifications

FJ6/JTS2D-35/2*6(18L)

Configuration: One-input; two-output

Input conductor range: 10-35 mm²

Output conductor range: 1.5–6 mm²

Dimensions: 82(W)*50(H)*18(L)

Order Number: 210705

FJ6/JTS2D-35/4*6(18L)

Configuration: One-input; four-output

Input conductor range: 10-35 mm²

Output conductor range: 1.5–6 mm²

Dimensions: 82(W)*50(H)*18(L)

Order Number: 210706

FJ6/JTS2D-35/6*6(18L)

Configuration: One-input; six-output

Input conductor range: 10-35 mm²

Output conductor range: 1.5–6 mm²

Dimensions: 82(W)*50(H)*18(L)

Order Number: 210707

Installation and Operation

Fixed mounting on base plate using M5 screws.
DIN rail mounting on standard 35 mm rail (TH-35).

Installation Notes

Installation and wiring shall be carried out with the power supply disconnected.
During installation and operation, ensure conductors are fully inserted into the clamping area.
After installation, all connection points shall be checked for secure fixing